AV750, 1.0hp Package for Myford Super 7, Raglan Mk5, Boxford AUD/CUD
(10 customer reviews)
5.00 out of 5 based on 10 customer ratings

£510.00 inc.Vat | £425.00 ex.VAT

CL750, 1.0hp Package for Myford Super 7, Raglan Mk5, Boxford AUD/CUD

AV750, 1.0hp Package for Myford Super 7, Raglan Mk5, Boxford AUD/CUD

(10 customer reviews)
5.00 out of 5 based on 10 customer ratings

£510.00 inc.Vat | £425.00 ex.VAT

AV750 Pre-wired Lathe Speed Controller and correct B56 Motor (5/8ths shaft diameter) to suit Myford Super 7, Tri-Lever, Myford 254,    also other lathes such as Raglan Mk5 “Little John”, and Boxford AUD etc.Supplied with the correct B56 frame  motor with 5/8ths diameter shaft and resilient mount cradle to bolt straight on to the Myford Super 7 bedplate.

!!10 year warranty on the inverter!!

 

 

 

 

Completely pre-wired (no wiring required at all!).  Can also be supplied with Metric D80 frame motors to suit using on other machines.

 

10 year warranty  on the inverter, 3 years on the motor

Fitted in approx 30mins. Full installation & Operating Instructions supplied.

“Plug and play”

Features; Emergency Stop, Start & Stop, FWD/REV, Inch and Variable Speed.

EMC / CE Compliant. Designed and manufactured here in the UK.

 

1.0HP, 750W Pre-wired Lathe Speed Controller and Motor to suit a range of lathes including; Myford Super 7, Tri-Lever, Myford 254, Raglan Mk5 “Little John”, and Boxford AUD etc.

Supplied with correct B56 frame size “direct-replacement” motor with the correct 5/8ths diameter motor shaft to bolt straight on to the Myford and Raglan motor bedplates. Completely pre-wired and pre-programmed (no wiring required at all!).  Can also be supplied with Metric D80 frame motors to suit other machines.

Fitted in approx 30mins. Full installation & Operating Instructions supplied.

“Plug and play”

Features; Emergency Stop, Start & Stop, FWD/REV, Inch and Variable Speed.

EMC / CE Compliant. Designed and manufactured here in the UK.

An amazing 10 year warranty on the inverter (conditions apply) for piece of mind and reliability

A 3 year warranty on the motor

!! Please note:  shipping cost defaults to UK standard shipping, if purchasing from outside of the mainland UK please contact us for shipping to your country!!

Weight20 kg
Dimensions40 x 40 x 40 cm

10 reviews for AV750, 1.0hp Package for Myford Super 7, Raglan Mk5, Boxford AUD/CUD

  1. John Edwards
    5 out of 5

    :

    I bought the AV750 earlier this year for my Myford Super 7 Sigma. Although it had a fairly young [in Myford] terms 1 Phase motor it was noisy, jerky and rough in operation. The AV750 kit was simplicity to fit and I finished the job in thirty minutes with no modification to swarf guard etc required. Now I turn, part off, thread and ream etc with no dramatics. Transformed the operation of my machine and I would thoroughly recommend. The service you get from Newton Tesla ( Electric Drives) Ltd is also first class

  2. Derek
    5 out of 5

    :

    Many thanks, package arrived safe and sound, fitted perfectly. Very pleased. Extra long motor lead just right length.

  3. Michael, Belgium.
    5 out of 5

    :

    As I reported already the AV750 is installed on my lathe. It does all what it promised! And installing was quite simple, was literally plug and play!"

  4. Jerry Burchell
    5 out of 5

    :

    This company is such a pleasure to deal with; straight-forward and quick delivery time. I should have fitted the AV750 to my Myford years ago. I have been putting up with the ‘orrible single-phase motor/switch arrangement for years. Straightforward fitting and a revelation now! Soft start is great and I love the speed control. What a great product. In due course another will be fitted to my Tom Senior mill.

  5. Richard Bowers
    5 out of 5

    :

    I was considering changing my aging super 7 for one of the far eastern imports but when I was looking back through my Model Engineers workshop there was a review of this unit and I decided to upgrade what is a good solid machine.

    I ordered the unit which I received in only a few days and installed the unit in a very short time, (removing the motor pulley being the hardest job).

    The unit has transformed the lathe and given functions only obtainable before with belt or gearing changes.

    To sum up a Brilliant piece of kit ready set up for you and fully functional in a very short time

  6. Michel Christiaens
    5 out of 5

    :

    The package with the AV750 arrived here yesterday afternoon.
    This morning I made the preliminary test as per downloaded manual and this afternoon I have installed everything. There where some complications but only mechanical in nature. But, then again: I didn’t expect it to be a drop-in replacement and all the issues are solved. Now everything works fine. I haven’t had the opportunity to actually use the lathe but it runs much, much more quiet at all speeds.
    Thank you for the good service.
    Best regards,
    Michel

  7. James Hill.
    5 out of 5

    :

    A quick note to thank you for the new lathe control system for my Myford Super 7. It arrived by TNT about midday yesterday (Wednesday) and it was fitted and running by late afternoon and I managed to finish the job that had been stuck in the lathe since the original motor had blown.

    The new motor is lovely and smooth by any standard but particularly when compared to the old motor! It was quite funny when I first hit the ‘start’ button, the lathe clutch was disengaged and I thought something was wrong as nothing seem to happen but then I realised the motor was running but so quietly I had not heard it wind up.

    Anyway the new system seems to be really lovely and worth the wait.
    Thanks and best regards

  8. Mr D. Allinson
    5 out of 5

    :

    Hi John

    Just a quick line to say that the AV750, 1.0hp Package for Myford Super 7 has fitted fine to my Taiwanese-built LEAD SUN MJ-650 metal working lathe.

    All I did is mark out, drill and tap the lathe bed to suit your motor hole sizes and I now have a variable speed functioning lathe again

    Thanks for all your help

  9. Mick Durkin
    5 out of 5

    :

    Received promptly and very well packed. It does exactly what it is supposed to do. Very nicely made. Superb smooth runner. Nothing more to say except “Why didn’t I get one earlier?”.

  10. Dr Weeks
    5 out of 5

    :

    I received my AV750 controller and 1 hp 3 phase motor before Christmas and was delighted upon opening my present on Christmas morning. I have now had the pleasure of fitting the system to my lathe and must say how simple this was to do . I have only had time to play a little with it but so far am delighted.

Add a review

Only logged in customers who have purchased this product may leave a review.